spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 1 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 1.6x0.8x0.5mm bi-color surface mount led attention observe precautions for handling electrostatic discharge sensitive devices part number: APHB1608ZGSURKC green hyper red features z 1.6mmx0.8mm smt led, 0.5mm thickness. z compatible with reflow soldering z available in various color combination z package: 2000pcs / reel . z moisture sensitivity level : level 3. z rohs compliant. description the green source color devices are made with ingan on sapphire light emitting diode. the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 2 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APHB1608ZGSURKC green (ingan) water clear 180 350 hyper red (algainp) 110 230 130 symbol parameter device typ. max. units test conditions peak peak wavelength green hyper red 515 650 nm i f =20ma d [1] dominant wavelength green hyper red 525 630 nm i f =20ma ? 1/2 spectral line half-width green hyper red 30 28 nm i f =20ma c capacitance green hyper red 45 35 pf v f =0v;f=1mhz v f [2] forward voltage green hyper red 3.3 1.95 4.1 2.5 v i f =20ma i r reverse current green hyper red 50 10 ua v r = 5v parameter green hyper red units power dissipation 102.5 75 mw dc forward current 25 30 ma peak forward current [1] 150 185 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 3 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 APHB1608ZGSURKC green
spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 4 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 hyper red
spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 5 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 APHB1608ZGSURKC reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsak7548 rev no: v.1 date: may/10/2010 page: 6 of 6 approved: wynec checked: allen liu drawn: y.f.lv erp: 1203011134 packing & label specifications APHB1608ZGSURKC
|
